Aeroflow - 5ft. Race Shifter Cable Suit all Aeroflow Bang Shift Shifters and most B&M Shifters
The Aeroflow Performance hard-core heavy duty Race shifter cables are the must have cable weather it is a street car or a race car. Witha large 9.52mm (3/8") outer diameter cable housing that is pre-lubed with HPRE oil for smooth operation. Theyare designed with enough clearance to reduce backlash with a 9.52mm (.375") long-Jay outer jacket for durability which is less-likely to kink during operation. The cable features an eyelet at one end to connect to the shifter, a 10-32 threaded end at the transmission side of the cablewith rotary swaged ends. This is the standard cable suppliedwith the Aeroflow Nitro, Pistol, Attack and various B&M shifters.
Shifter cablesare measured from end to end. Please ensure that this is thecorrect length for your application. Do not let the cable kink anywhere along its length when it is installed, if it is kinked it will not operate the transmission correctly. The cable should bekept straight for 2 inches on either end of the cable to ensure correct operation. If this is not followed it will cause damage to all componentsassociated to the shifter cable including transmission.
INSULATE SHIFTER CABLES FROM HEAT
Ensure tocorrectly run your shifter cable away from any heat source such as exhaust systems. It is recommended to run a heat sleeve or make a heat shield from embossed aluminium to protect the cablefrom damage.
