Ford Barra Mechanical Fuel Pump Bracket Kit
We have come up with an economical mechanical fuel pump bracket kit that will work with your factory AC still in place, however, you will still need to have some sort of header tank fabricated to feed the pump. Depending on your application this shouldn't be too much of a problem, the way we look at it is if you require this sort of setting up then you will have a preferred workshop who can complete the installation.
Our mechanical fuel pump bracket kit has been designed to work with the Aeromotive billet drive fuel pump PN11105 Upto 900KW & PN11115 1300+ KW
Depending on the volume of your header tank we recommend using a high-volume low-pressure Walbro in-tank pump to supply the header tank. This will give you approximately 5psi of head pressure in the header tank which in return helps with the self-priming of the pump.
Parts List
- 1x Bracket
- 1 x Hub Washer
- 1x Balancer Hub Adaptor
- 2 x Belts CT270L 1/2 Wide
- 1 x 3/8 UNC x 1/4 Bolt
- 1 x Washer 3/8"
- 1 x Bolt M8 x 90
- 2 x Washer M8 x 19.0x1.6
- 1 x Bolt M8 x 55
- 1 x C/Sunk M8 x 20
- 3 x C/Sunk 3/8 UNC x 1-1/4
- 1 x Key steel 3mmx3mmx15mm
We have designed this package as a tuner kit allowing you to purchase the most expensive parts yourself (which can be purchased from just about anyone these days at very competitive prices). Please note that this kit will only work with the ATI harmonic balancer which can be purchased directly from Atomic Performance Parts or Dynomite Performance.
